APPLICATION

SIZE	TYPE OF BODY	STANDARD APPLICATION				PARALLEL APPLICATION				MAX. DOOR WEIGHT	MAX. DOOR WIDTH
		WITHOUT HOLD OPEN		WITH HOLD OPEN		WITHOUT HOLD OPEN		WITH HOLD OPEN
		WITH- OUT COVER	WITH COVER	WITH- OUT COVER	WITH COVER	WITH- OUT COVER	WITH COVER	WITH- OUT COVER	WITH COVER
2	Without back-check	8802	8852	S- 8802	S-8852	8802P	8852P	S-8802P	S-8852P	45KG	900MM
	With back-check	8802 BC	8852 BC	S-8802 BC	S-8852 BC	8802 PBC	8852 PBC	S-8802 PBC	S-8852 PBC
3	Without back-check	8803	8853	S- 8803	S-8853	8803P	8853P	S-8803P	S-8853P	65KG	965MM
	With back-check	8803 BC	8853 BC	S-8803 BC	S-8853 BC	8803 PBC	8853 PBC	S-8803 PBC	S-8853 PBC
To EN 1154 size 3	Without back-check	8803 EN	8853 EN	-	-	-	-	-	-	60KG	950MM
	With back-check	-	-	-	-	-	-	-	-

LATCHING POWER ADJUSTMENT

By changing the position of the frame arm on the foot bracket closing force at the latch can be increased or decreased. This can be achieved with the foot bracket in position.

FULLY HYDRAULIC CONTROL

Controls the door through the entire opening and closing cycles by providing adjustable backcheck upon opening and adjustable general and latch speed through the closing cycle.

OPTIONAL ADJUSTABLE BACKCHECK

A backcheck feature set and adjusted by an independent valve. When introduced the backcheck stalls the opening of the door around 70 degrees. When doors are violently opened by pedestrians or wind, the backcheck feature reduces the likelihood of damage should contact be made with an adjacent wall or obstacle.

PERIODIC MAINTENANCE

None required other than to check security of fixing on a regular basis.

OPTIONAL HOLD-OPEN

The non-handed, optional hold open arm allows the door to be held open at any angles between 70 and 180 degrees. The cam and bearing type hold open ensures adequate hold open by adjustable hold open force.

VARIOUS FINISH

8800 Door Closers are available in ; SILVER, DARK BRONZE, METALIC LEMON GOLD, BLACK, or WHITE finishes. POLISHED GOLD AND POLISHED SILVER are available for 8852 and 8853.