RYOBI


search   Site Map

HOMECorporate ProfileInvestor Relations
BUILDERS' HARDWARE
Home > Builders' Hardware > Products > Hardware > Door Coordinators
Print

Hardware

< back

DOOR COORDINATORS

Applicable door size

Model No. Door width
(1st closing door)
Door width
(2nd closing door)
Offset-hung Center-hung Offset-hung Center-hung
JC-25 1000 1000 1000 1000
JC-35 1000∼2000 1000∼3000 1000∼2000 1000∼3000

Applicable door size for air-tight door

Model No. Door width
(1st closing door)
Door width
(2nd closing door)
Offset-hung Center-hung Offset-hung Center-hung
JC-25 500 1000 1000 1000
JC-35 500∼1000 1000∼1500 1000∼2000 1000∼3000

Installation top view

Note

Door width of 1st closing door leaf must be less than 500mm in case JC series door coordinatoy is used for airtight door due to the shape of cover plate portion as shown on the following illustration.


Installation side view

Applicable door size

Model No. Door width
(1st closing door)
Door width
(2nd closing door)
Offset-hung Center-hung Offset-hung Center-hung
JC-25 1000 1000 1000 1000
JC-35 1000∼1500 1000∼1500 1000∼1500 1000∼2000

Adjustment of arm angle

  1. Adjust arm angle between 85°-88° against 2nd closing door leaf when 2nd closing door begins to close.
  2. Turm arm angle adjusting screw clockwise to move arm toward direction A, and turn counter-clockwise to move arm toward direction B.

Installation top view

Installation side view(ex.1)

Installation side view(ex.2)