RYOBI
search   Site Map

HOMECorporate ProfileInvestor Relations
PRINTING EQUIPMENT
Home > Printing Equipment > Peripherals > RYOBI RP920-780MB		 Print

Peripherals

< back

High-Precision Register Punch with Plate Bender
RYOBI RP920-780MB



1.
The CCD camera scan the register marks exposed on the plate and displays them on the center monitor.

2.
Diagonal, vertical and lateral micro-adjustments can then be easily performed by dial operation, assuring accurate plate punching. The system bends and punches the plate simultaneously.

3.
The PB-S-Ryobi 920 (manufactured by BEIL-Registersysteme GmbH) is also optionally available as a device for plate bending only.

Specifications
Model
RYOBI RP920-780MB
Min. Plate Size
650 x 550 mm (25.59" x 21.65")
Max. Plate Size
910 x 665 mm (35.83" x 26.18")
Punch Hole Pitch
425mm or 780mm (16.73" or 30.71")
Max. Plate Thickness
0.15-0.3 mm (0.006"-0.012")
Plate micro adjustment Range
Vertical/Lateral: ±2.5 mm (0.098")
Measuring range of the CCD camera
Vertical: 10-340 mm (0.39"-13.29")
Lateral: 190-915 mm (7.48"-36.02")
Punching mechnism
Auto
* Design and specification are subject to change without notice.
   Specifications may slightly differ depending on the country.