OVERHEAD CONCEALED DOOR CLOSERS 30 SERIES
You can download the CAD data from this web site. Updated of each drawing is shown on CAD data list.
|MODEL NAME||HOLD-OPEN DEVICE||Width(mm)
EXTERNAL or INTERNAL
|SIDE LOAD||30-2_S||W_WO HOLD-OPEN||750 to 950||70|
|30-3_S||W_WO HOLD-OPEN||900 to 1050||110|
|30-4_S||W_WO HOLD-OPEN||1050 to 1250||170|
|END LOAD||30-2_K||W_WO HOLD-OPEN||750 to 950||70|
|30-3_K||W_WO HOLD-OPEN||900 to 1050||110|
|30-4_K||W_WO HOLD-OPEN||1050 to 1250||170|
■Notice for using the CAD data
Please be sure to check the following points at downloading the CAD data from our web site.
1. Propose for using
The uploaded CAD data are prepared only for using design process efficiently. It is prohibited to utilize the downloaded CAD data other than for intended propose.
The Copyright of the uploaded CAD data shall belong to Ryobi Limited. It is prohibited to provide the downloaded CAD data to third parties.
Ryobi Limited will not bear any responsibility for any loss caused by using the downloaded CAD data.
4. Revising and Deleting
The contents of CAD data are subject to change and delete without notice due to the design change.