CAD data
DOOR CLOSER CONCEALED DOORCLOSER
You can download the CAD data from this web site. Updated of each drawing is shown on CAD data list.
MODEL NAME | HOLD-OPEN DEVICE | Width(mm) EXTERNAL or INTERNAL |
Thickness(mm) | Weight(kg) | File type | ||
---|---|---|---|---|---|---|---|
CO-52 | WITHOUT HOLD-OPEN | 900 | 40 or more (Steel) 45 or more (Wooden) |
45 | |||
CO-152 | WITH HOLD-OPEN | 900 | 40 or more (Steel) 45 or more (Wooden) |
45 | |||
CO-53 | WITHOUT HOLD-OPEN | 950 | 45 or more (Steel) 50 or more (Wooden) |
65 | |||
CO-153 | WITH HOLD-OPEN | 950 | 45 or more (Steel) 50 or more (Wooden) |
65 | |||
CO-54 | WITHOUT HOLD-OPEN | 1050 | 45 or more (Steel) 50 or more (Wooden) |
85 | |||
CO-154 | WITH HOLD-OPEN | 1050 | 45 or more (Steel) 50 or more (Wooden) |
85 | |||
CO-55 | WITHOUT HOLD-OPEN | 1200 | 60 or more (Steel) 65 or more (Wooden) |
120 | |||
CO-155 | WITH HOLD-OPEN | 1200 | 60 or more (Steel) 65 or more (Wooden) |
120 | |||
CO-56 | WITHOUT HOLD-OPEN | 1800 | 60 or more (Steel) 65 or more (Wooden) |
180 |
MODEL NAME | HOLD-OPEN DEVICE | Width(mm) EXTERNAL or INTERNAL |
Thickness(mm) | Weight(kg) | File type | ||
---|---|---|---|---|---|---|---|
COU-52 | WITHOUT HOLD-OPEN | 900 | 36 or more (Steel) 40 or more (Wooden) |
45 | |||
COU-152 | WITH HOLD-OPEN | 900 | 36 or more (Steel) 40 or more (Wooden) |
45 | |||
COU-53 | WITHOUT HOLD-OPEN | 950 | 36 or more (Steel) 40 or more (Wooden) |
65 | |||
COU-153 | WITH HOLD-OPEN | 950 | 36 or more (Steel) 40 or more (Wooden) |
65 |
â– Notice for using the CAD data
Please be sure to check the following points at downloading the CAD data from our web site.
-
1. Propose for using
The uploaded CAD data are prepared only for using design process efficiently. It is prohibited to utilize the downloaded CAD data other than for intended propose.
-
2. Copyright
The Copyright of the uploaded CAD data shall belong to Ryobi Limited. It is prohibited to provide the downloaded CAD data to third parties.
-
3. Disclaimer
Ryobi Limited will not bear any responsibility for any loss caused by using the downloaded CAD data.
-
4. Revising and Deleting
The contents of CAD data are subject to change and delete without notice due to the design change.