DOOR CLOSER D-1500 SERIES
You can download the CAD data from this web site. Updated of each drawing is shown on CAD data list.
|MODEL NAME||HOLD-OPEN DEVICE||Width(mm)
EXTERNAL or INTERNAL
|STANDARD||D-1502,D-1502BC||WITHOUT HOLD-OPEN||800 or 900||50|
|D-1503,D-1503BC||WITHOUT HOLD-OPEN||900 or 1050||65|
|D-1504,D-1504BC||WITHOUT HOLD-OPEN||950 or 1200||80|
|DS-1502,DS-1502BC||WITH HOLD-OPEN||800 or 900||50|
|DS-1503,DS-1503BC||WITH HOLD-OPEN||900 or 1050||65|
|DS-1504,DS-1504BC||WITH HOLD-OPEN||950 or 1200||80|
|PARALLEL||D-1502P,D-1502BCP||WITHOUT HOLD-OPEN||800 or 900||50|
|D-1503P,D-1503BCP||WITHOUT HOLD-OPEN||900 or 1050||65|
|D-1504P,D-1504BCP||WITHOUT HOLD-OPEN||950 or 1200||80|
|DS-1502P,DS-1502BCP||WITH HOLD-OPEN||800 or 900||50|
|DS-1503P,DS-1503BCP||WITH HOLD-OPEN||900 or 1050||65|
|DS-1504P,DS-1504BCP||WITH HOLD-OPEN||950 or 1200||80|
|TRACK-RAIL||D-1500T,D-1500BCT||WITHOUT HOLD-OPEN||900 or 1050||65|
|DS-1500T,DS-1500BCT||WITH HOLD-OPEN||900 or 1050||65|
■Notice for using the CAD data
Please be sure to check the following points at downloading the CAD data from our web site.
1. Propose for using
The uploaded CAD data are prepared only for using design process efficiently. It is prohibited to utilize the downloaded CAD data other than for intended propose.
The Copyright of the uploaded CAD data shall belong to Ryobi Limited. It is prohibited to provide the downloaded CAD data to third parties.
Ryobi Limited will not bear any responsibility for any loss caused by using the downloaded CAD data.
4. Revising and Deleting
The contents of CAD data are subject to change and delete without notice due to the design change.