RYOBI


search   Site Map

HOMECorporate ProfileInvestor Relations
BUILDERS' HARDWARE
Home > Builders' Hardware > Products > Floor Hinges and Patch Fitting > 200 Series Application/Feature
Print

Floor Hinges and Patch Fitting

< back

FLOOR HINGE 200 SERIES
CLASSICAL TYPE

APPLICATION

Model With 90° Hold-open S-201N S-202N S-201Y S-202Y S-201K S-202K S-203K S-204K
Without Hold-open 201N 202N 201Y 202Y 201K 202K 203K 204K
Maximum Door Width 900mm 950mm 900mm 950mm 900mm 950mm 950mm 1050mm
Maximum Door Weight 80kg 130kg 80kg 130kg 80kg 130kg 180kg 185kg
Maximum Opening Angle (degrees) 113°
Applicable Door Aluminum, Steel, Stainless Steel, Wood
Cement Case Dimension (mm) 280x132x47.5 280x130x54.5 280x132x47.5 298x146x47
Feature General Speed Adjustment
2nd Speed Adjustment
Closing Position Adjustment
Height Position Adjustment
Double Action

* : Please consult with Ryobi authorized distributor to select tapping screw when installing floor hinge with wooden door.


NON HANDED

200 Series Door Closers can be used on both RH and LH doors and on both push side and pull side mountings.


TWO SPEED CONTROL VALVES

There are two speed ranges for door closing speed which can be adjusted by independent speed valves.



OPTIONAL HOLD-OPEN

The non handed, optional hold-open arm allows the door to be held open up to 90 degrees.


ADJUSTMENT OF FLOOR HINGE BODY POSITION

Gap between door lower section and frame can be adjusted with screws of the main body.





Adjustable range for closing position and clearance

Vertical Lateral Level Height
200 Series 7mm 10mm - -





FOR ALL DOORS

It is applicable for Aluminum, Steel, Stainless steel and Wood doors.