RYOBI


search   Site Map

HOMECorporate ProfileInvestor Relations
BUILDERS' HARDWARE
Home > Builders' Hardware > Products > Floor Hinges and Patch Fitting > 500 Series Application/Feature
Print

Floor Hinges and Patch Fitting

< back

FLOOR HINGE 500 SERIES
COMPACT AND NARROW BODY TYPE

APPLICATION

Model With 90° Hold-open S-500V S-500VDA
Without Hold-open 500V 500VDA
Maximum Door Width 1100mm
Maximum Door Weight 120kg
Maximum Opening Angle (degrees) 175°
Applicable Door Aluminum, Steel, Stainless Steel, Wood
Cement Case Dimension (mm) 275x82x50
Feature 1st Speed Adjustment
2nd Speed Adjustment
Closing Position Adjustment
Height Position Adjustment
Mechanical Backcheck
Delayed Action
Double Action
Tested To CE EN1154
Tested To CE EN1634-1

* : Please consult with Ryobi authorized distributor to select tapping screw when installing floor hinge with wooden door.


NON HANDED

500 Series Door Closers can be used on both RH and LH doors and on push side and pull side mountings.


TWO SPEED CONTROL VALVES

There are two speed ranges for door closing speed which can be adjusted by independent speed valves.





HOLD-OPEN

Models with hold-open at 90° are available.


STANDARD MECHANICAL BACKCHECK

When doors are violently opened by pedestrians or wind, the backcheck feature reduces the likelihood of damage should contact be made with an adjacent wall or obstacle.


OPTIONAL DELAYED ACTION

Once set, the door - when opened beyond 65 degrees enters into a delayed mode allowing additional closing time.
Advantage to : Nursing staff assisting patients, Domestic staff pushing meals or maintenance trolleys, and the elderly or infirm walking with sticks or frames under supervision.


CLOSING POWER ADJUSTMENT

Spring Power adjustable according to door weight and width EN 1 through EN 4.
Factory preset size is 3.


ADJUSTMENT OF FLOOR HINGE BODY POSITION

Gap between door lower section and frame can be adjusted with screws of the main body.





Adjustable range for closing position and clearance

Vertical Lateral Level Height
500 Series 10mm 10mm - 4mm





HEIGHT ADJUSTMENT

Inter changeable spindle can be extended up to 50mm.
Customs made spindle shape may be available.



FOR ALL DOORS

It is applicable for Aluminum, Steel, Stainless steel and Wood doors.